Blue Surge

Most homeowners will often have water leaks in their basements, if they have one, so it is almost a guarantee that they will look to purchase basement waterproofing products and gather information on how to best resolve their leaks.

The first thing to examine is the reason why basements are affected so much by water seepage and flooding. Excess moisture in your basement not only limits your use of the space but it also can cause a number of serious problems structurally as well as ruin or destroy furniture and furnishings.

Basements are the part of a home or building that is wholly or partially below ground level. After the floor and walls of the basement are finished, loose soil is used to fill in the rest of the hole. The loose soil around the basement provides the least resistance to water and it will use this path to seep into that area. The end result of this is likely to be that you will find that there is an accumulation of water either surrounding or even underlying your basement.

This causes water to weigh down, and to exert pressure upon the floor, and upon the basement walls. Without adequate basement waterproofing, water will seep through even the smallest crack which then ruins the outside protective coating. This sometimes happens even with systems that are designed to remove water away from the building because pipes get blocked with silt or heavy rainfalls overload the system.

This is when most people decide to turn their project into a do-it-yourself basement waterproofing project rather than have someone excavate and re-do it professionally and, usually, at great financial cost. The often-used solution is to tackle the inside rather than the outside, by utilising products such as sealants on the inner walls and floor.

A typical project might involve:

• typical projects involve removing loose material to prepare walls
• remove any previous repair material or foreign material.
• make sure the basement is as dry as possible, hire heaters or large fans if necessary.
• prime walls and floor if the product requires use of a primer.
• repair all easily seen gaps, flaws, seams, or joints.
• wall/floor junctions may require a 1″ bead of sealant.
• using 2 or 3 coats to top-coat all surfaces

That is about all Provided that you are careful about choosing a superior product for this job, on completion your basement will be completely sealed and the waterproofing can be expected to last for several years. Top sealants such as PermaFlex are supposed to be a complete, permanent indoor basement waterproofing system. The quote says that it is the only waterproofing system which totally seals any basement for all times. It could be very wet and deteriorated though. It can then be brushed, rolled over or even be sprayed on.

A full solution would cost homeowners a fraction of the cost and is perfect for do-it-yourself basement waterproofing. It’s also a wonderful solution for those with budget concerns with common and often expensive problems.

Comments are closed.